• Pour avoir accès au forum les nouveaux membres inscrits doivent obligatoirement se présenter et attendre que leur présentation soit approuvée par un membre du Staff.
  • Vous n'arrivez pas a publier ou a télécharger ! Merci de lire le Réglement
  • Spécialiste Electronique auto a Paris.

    Specialiste Auto vous proposes avec une Garantie a vie !!!! Suppression FAP ( DEFAP ) Suppression ADBLUE Reparation Calculateur Reparation EZS ELV Reprogrammation Adaptation Boite de vitesse Systeme hybrid Boitier module OCCASSION / NEUF Désactivation Volets de tubulures d'admission ...

    Plus d'information Clique ici

    Contacter nous au 0754373786

    Envoi Possible de Toute la France si vous étes pas de Paris

Homebrew [Switch] SwitchSDTool disponible pour profiter des NSP

laurent68 ™

Ancien Staff
Ancien Staff
Membre Actif
Inscrit
3 Avril 2016
Messages
3,793
Reaction score
1,312
Points
5,108
Le développeur Caitsith2 propose un tout nouvel utilitaire à la scène Nintendo Switch nommé SwitchSDTool qui n'est autre qu'un dumper NSP pour créer sans utiliser des outils complexes. En somme, cet outil permet d'emballer les NSP en jeux achetés légalement via l'eShop, ce qui permet de se passer de la playade d'outils CDN.


Il vous suffit de changer le nom à chaque fois que vous achetez un jeu, afin d'extraire les tickets pour le pack NSP. Pour profiter du software, vous devez bien entendu disposer du keys.txt.

----- How to dump NSPs from your SD card for the First time. -----

Step 1: Put your Switch into Airplane mode and remove ALL wifi connection profiles. (Safety measure to avoid a potential ban.)
Step 2: Follow the tutorial at to dump your nand, keys.txt and biskey dump.
Step 3: Restore the nand back up, if you have not already done so via above tutorial following the dumping of biskey.txt and keys.txt. (Safety measure to avoid a potential ban.)
Step 4: Grab Hac Disk Mount from
Step 5: Power off your switch. Mount the SD card from your switch to your PC.
Step 6: Open up hac disk mount with Administrator Priveleges. (This is mandatory in order to install the Virtual Drive driver.).
Step 7: Open up rawnand.bin in hac disk mount.
Step 8: Double click on PRODINFO
Step 9: Open up biskey.txt and copy in the Crypto and Tweak keys from Bis Key 0, then click on Test. Make sure the result says Entropy OK.
Step 10: Click on Browse in Dump to File, and browse to the location where you extracted this tool to.
Step 11: Click on Start.
Step 12: Click on the X. we are done with PRODINFO.
Step 13: Double click on System.
Step 14: Copy in the Crypto and Tweak keys from Bis Key 2, the click on Test. Make sure the result says Entropy OK.
Step 15: Install the Virtual Drive driver. (If it errors, you need to reopen Hac disk mount with administrator priveleges.)
Step 16: Click on Mount.
Step 17: Copy keys.txt from the SD card to where you extracted this tool.
Step 18: Open the tool. (If it errors, make sure you have installed .NET Framework 4.7.1)
Step 19: Click on Select SD Folder. Choose the Drive that the SD is mounted to.
Step 20: Click on Select System Path. Choose the Drive letter you mounted the SYSTEM partition to. (A drive by default.)
Step 21: Click on Select Decryption Path. Choose where you want the decrypted NCAs to reside.
Step 22: Click on Select NSP Output Path. Choose where you want your NSP dumps to be saved.
Step 23: Google for eticket_rsa_kek.
Step 24: Paste the results in the text field that says "Replace me with the actual eticket_rsa_kek.".
Step 25: The Log should say "ETicket RSA KEK is correct.". If it does not, go back to step 22 and try harder.
Step 26: Click on "Find SD Key". The log should say "SD Key Loaded".
Step 27: Click on Load RSA KEK. The log should have two entries. "E-Ticket RSA Key Encryption Key loaded successfully" and "RSA Key extracted successfully from PRODINFO.bin".
Step 28: Click on Extract Tickets. Log should say "Dumping Tickets" followed shortly by "Done. x Tickets dumped".
Step 29: Click on Decyrpt NCAs. Log should show a bunch of "Processing --file--.nca - Decrypting, Done. Verifying, Verified. (May start with Joining, Done).
Step 30: Click on the Language Tab.
Step 31: Click on your preferred language, and move it to the top by click on Move Up. Repeat for 2nd preference.
Step 32: Click on the Games Tab, then Click on Parse NCAs. This should finish, and all of your games present on the SD card should be listed, along with any Updates and DLC.
Step 33: Click on Pack ALL NSPs to pack everything, or select a game, and click on Pack Selected NSP to pack that NSP only.
Step 34: Close the tool.
Step 35: Unmount the SYSTEM partition and close hac disk mount.
Step 36: Unmount the SD card and put it back into your switch.

----- How to Dump NSPs from new purchases / updates since last dumping. -----

Step 1. Dump your nand, following the guide at (Provided you saved biskey and keys.txt, you won't need to redump those.)
Step 2: Power off your switch. Mount the SD card from your switch to your PC.
Step 3: Open up hac disk mount with Administrator Priveleges. (This is mandatory in order to install the Virtual Drive driver.).
Step 4: Open up rawnand.bin in hac disk mount.
Step 5: Double click on System.
Step 6: Copy in the Crypto and Tweak keys from Bis Key 2, the click on Test. Make sure the result says Entropy OK.
Step 7: Click on Mount.
Step 8: Open the tool.
Step 9: Click on "Find SD Key". The log should say "SD Key Loaded".
Step 10: Click on Load RSA KEK. The log should have two entries. "E-Ticket RSA Key Encryption Key loaded successfully" and "RSA Key extracted successfully from PRODINFO.bin".
Step 11: Click on Extract Tickets. Log should say "Dumping Tickets" followed shortly by "Done. x Tickets dumped".
Step 12: Click on Decyrpt NCAs. Log should show a bunch of "Processing --file--.nca - Decrypting, Done. Verifying, Verified. (May start with Joining, Done).
Step 13: Click on the Games Tab, then Click on Parse NCAs. This should finish, and all of your games present on the SD card should be listed, along with any Updates and DLC.
Step 14: Click on Pack ALL NSPs to pack everything, or select a game, and click on Pack Selected NSP to pack that NSP only.
Step 15: Close the tool.
Step 16: Unmount the SYSTEM partition and close hac disk mount.
Step 17: Unmount the SD card and put it back into your switch.


Téléchargement :
Contenu caché
Vous devez répondre au message pour voir ce contenu.
 

Auteur Sujets similaires Forum Réponses Date
laurent68 ™ Homebrew [Switch] SwitchSDTool v1.10 Hack/ Homebrew 2
laurent68 ™ Homebrew [Switch] SwitchSDTool v1.09 Hack/ Homebrew 0
laurent68 ™ Homebrew [Switch] SwitchSDTool v1.08 Hack/ Homebrew 0
laurent68 ™ Homebrew [Switch] SwitchSDTool v1.0.7 Hack/ Homebrew 0
popostef Demande Nouvelle puce Switch Switch 0
S Question Switch Bannie Switch 0
P Question Puce Switch Switch 2
scorpionoir1982 Discussion [PS4/PC/PSP/Switch] Super Mario 64, le portage progresse Discussions Ps4 5
Manfire Discussion Switch Jeux eshop Discussion 5
sfrancky Question switch 2019 hac-001(-01) Switch 7
M Discussion [Switch] crackée = détection ou pas ? Discussion 5
H Discussion aide pour switch Discussion 6
laurent68 ™ Homebrew [Switch] Le dongle AceNS Pro Hack/ Homebrew 9
laurent68 ™ Homebrew [Switch] pPlay v1.5 Hack/ Homebrew 0
laurent68 ™ Homebrew [Switch] ClawSwitch le portage de Captain Claw Hack/ Homebrew 0
laurent68 ™ Discussion [Switch] Un nouveau FirmWare en approche ! Discussion 1
laurent68 ™ Homebrew [Switch/PSVita] uae4all2 v1.91 Hack/ Homebrew 0
laurent68 ™ Homebrew [Switch] Fluffy v1.5.1 - une interface graphique pour TinFoil Hack/ Homebrew 0
laurent68 ™ Homebrew [Switch] Le mod Bowsette pour New Super Mario Bros U Deluxe Hack/ Homebrew 0
laurent68 ™ Homebrew [Emu] Switch : Yuzu se met à jour en Nightly 1608 et Canary 1819 Hack/ Homebrew 0
laurent68 ™ Discussion [Switch] Le créateur de SwitchMe s'exprime Discussion 0
laurent68 ™ Homebrew [Switch] hacPack v1.36 Hack/ Homebrew 11
laurent68 ™ Homebrew [Switch] hacBrewPack v1.30 Hack/ Homebrew 0
laurent68 ™ Homebrew [Switch] Motezazer publie le décryptage TSEC du 6.2.0 Hack/ Homebrew 0
laurent68 ™ Homebrew [Switch] nxmtp v0.1.4 Hack/ Homebrew 0
laurent68 ™ Homebrew [Switch] 90DNS est disponible Hack/ Homebrew 0
laurent68 ™ Discussion [Switch] Des jeux SNES pour le Nintendo Switch Online Discussion 1
laurent68 ™ Homebrew [Switch] TUG v1.0 Hack/ Homebrew 0
laurent68 ™ Homebrew [Switch] NX Game Info v0.3.2a Hack/ Homebrew 0
laurent68 ™ Homebrew [Switch] OpenLara version finale Hack/ Homebrew 1
laurent68 ™ Homebrew [Switch] KipSelect est disponible avec GFX (maj) Hack/ Homebrew 0
laurent68 ™ Homebrew [Switch] SX Installer v1.2 Hack/ Homebrew 0
laurent68 ™ Discussion [Switch] Le site BuildServNX est disponible Discussion 0
laurent68 ™ Homebrew [Switch] Switch Layout Editor en v1.0 Beta 2.1 Hack/ Homebrew 0
laurent68 ™ Homebrew [Switch] pPlay v1.3 de Cpasjuste Hack/ Homebrew 0
laurent68 ™ Hack [Switch] Retour sur l'emuNAND du SX OS, sa fiabilité et le risque de ban Hack/ Homebrew 1
laurent68 ™ Homebrew [Switch] OpenLara maintenant sur Switch Hack/ Homebrew 0
laurent68 ™ Homebrew [Switch/Vita] Uae4All2 Mod v1.84 Hack/ Homebrew 0
laurent68 ™ Homebrew [Switch] vm-switch est disponible en version 1.0.0 Hack/ Homebrew 0
laurent68 ™ Homebrew [Switch] ThemeInstaller V3.6 & NXThemes Installer 1.2 Hack/ Homebrew 0
laurent68 ™ Homebrew [Switch] JKSV mis à jour par J-D-K Hack/ Homebrew 0
laurent68 ™ Homebrew [Switch] Bejeweled NX Hack/ Homebrew 0
laurent68 ™ Homebrew [Switch] EdiZon V1.7.0 "New user selection!" Hack/ Homebrew 0
laurent68 ™ Homebrew [Switch] SX OS 2.5.2 Stable Hack/ Homebrew 4
laurent68 ™ Homebrew [Switch] N64 aarch64 dynarec sur Horizon disponible en béta Hack/ Homebrew 0
laurent68 ™ Homebrew [Switch] Lugaru for Switch Hack/ Homebrew 0
laurent68 ™ Homebrew [Switch] SDLPoP v1.1 Hack/ Homebrew 0
laurent68 ™ Homebrew [Switch] MelonDS v0.7.3 Hack/ Homebrew 0
laurent68 ™ Homebrew [Switch] SSNC Checker Script - vérifier si une Switch est patchée ou non Hack/ Homebrew 0
laurent68 ™ Discussion [Switch] iyenal vous propose son moteur/SDK Gen7 Engine Discussion 0
Sujets similaires


















































Cliquez ici pour vous connecter en utilisant votre compte social
AdBlock Détecté

Nous comprenons, les publicités sont ennuyeuses !

Bien sûr, le logiciel de blocage des publicités fait un excellent travail pour bloquer les publicités, mais il bloque également les fonctionnalités utiles de notre site Web. Pour la meilleure expérience du site, veuillez désactiver votre AdBlocker.

J'ai désactivé AdBlock